Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.
You can install your above ground pool in just a few hours on a concrete slab, a groundsheet, a bed of sand, or directly on the grass. But preparing the surface carefully in advance is critical to avoid punctures and tears to your pool. That’s why you need to know what to put under above ground pool on grass.
Risk of Installing Directly On Grass
You can easily install your above ground pool on top of the grass, but if you are not careful it might lead to disappointing outcomes.
After choosing the location and ensuring that the surface is level and even enough, you will first need to:
- Give it a cut with your lawnmower.
- Remove any problematic debris and stones.
- Use your leaf rake and your yard brush to clear up the chosen area.
- Place a long-lasting groundsheet on top of the grass and install your pool.
Note the following: The grass, subdued by the weight of your above ground pool, will dry and die away. Hence, you will need to resow the empty patch, after preparing the soil, if you remove your pool in the future.
Preparing the Surface
First, you need to know the implications of your above ground pool installation in terms of the law, proximity to your neighbors, possible noise, and the layout of your lawn. You do not want to install your pool on gravel, a steep slope, or a bed of thorns.
Next, whether your facility is tubular, inflatable, or self-supporting, there is a significant weight to consider. Just to give you an idea, one cubic meter of water weighs one ton, a substantial weight which can over the time cause unprepared surface (bare grass) to collapse and damage the constituent materials of your pool.
Note the following: If you are planning to place your swimming pool on a concrete slab, you have nothing to fret about. On the flip side, installing on grass or bare ground requires a lot of preparation.
So, what do you need to do to install your above ground pool on grass or bare surface?
What To Put Under Above Ground Pool On Grass: A Sand Bed
You can use sand to stabilize the ground or grass, smoothing out uneven parts of the surface. There is a critical thing that you will need to follow to ensure that it turns out as intended. That’s, you will need to place a lot of sand on the grass or surface.
Without a doubt, there is a risk of getting sand all over the grass, but don’t fret; it will come in handy to mask the nasty smell from those offering of your neighbor’s cat.
Then, sprinkle water on top of the sand bed while rolling or tamping. Finally, place your groundsheet on top of the bed to prevent the growth of grass. Roll out this sheet to fit your above ground pool.
After that, you can position or inflate the pool itself.
You have the freedom of choosing what to put under above ground pool on grass. Of important, leave the area around your pool clear: kids love to run around and any trip hazard can turn a fun-filled afternoon into a trip to the hospital.